Author Topic: K.O.R.E. Bracket Systems (Read 3664 times)

TJ Ken · « **on:** 06/ 9/08 - 04:04PM »

Here at KORE we've been building rigs and parts with our extensive in-house fabrication equipment for quite some time. A lot of the rigs we've built have been platforms for prototyping new parts.

Through these prototypes, we have built a complete bracket system and have built up enough inventory to start advertising all of them so our customers won't have to wait for their parts...

We've got just about everything on the website right now, but have about 30 more parts in the manufacturing process right now waiting to be completed.

Let's start it off with our Lower Link Mount Bracket System...

CNC cut from 1/4" Steel & then formed on a press brake to 'wrap' around 1.75" Diameter Tubing.

These brackets differ from others out there b/c they are adjustable up to 25 degrees per side for different wheelbase setups.

Assembly comes with top & bottom plates as well as Four (1/4") thick control arm tabs with 9/16" Diameter punched holes.

3" Diameter Axle Coilover Shock Mount System

Front Dana 60 Inner 'C' Coilover Mount

Made to mount the shocks on your front Dana 60 as far out on the Inner C as possible for the most stable ride.
CNC cut to follow the contours of the Inner C. All you need to do is mount them to your axle.

TJ Ken · « **Reply #1 on:** 06/ 9/08 - 04:06PM »

Lower Control Arm Frame Bracket

CNC cut from 1/4" thick steel & then welded in our jig. These were designed to be used as a stout lower control arm mount on your frame.

Left Side

Right Side

Universal Upper Control Arm Mount

CNC cut from 3/16" steel & then formed on a press brake, these brackets make great mounts for your upper control arms. Two (9/16") bolt holes allow for suspension adjustments.

TJ Ken · « **Reply #2 on:** 06/ 9/08 - 04:08PM »

Let's switch gears for a minute....Rockwells!!!

Rockwell Upper Link Mount Towers

These KORE 2-1/2 Ton Rockwell Upper Link Mount Towers were designed to make installation of your upper control arms a snap. The brackets have three (9/16") holes to adjust the antisquat as needed for your rig.

The side plates of these towers are cut from 3/8" thick steel, while the middle gusset is cut from 1/4".

Rockwell Lower Link Tabs

These Lower Link Mount Tabs were designed to triangulate your lower control arms on your Rockwell axle. These work great with our Rockwell Upper Link Mount Towers. Tabs have 9/16" holes.

Rockwell Coilover Mounting Bracket

CNC cut from 1/4" thick high strength steel just like all of our other K.O.R.E. brackets for a precise fit. These brackets have been designed with a gusset built into the assembly for a strong final product.

TJ Ken · « **Reply #3 on:** 06/ 9/08 - 04:09PM »

Another one....

Upper Control Arm Frame Mount Bracket

These KORE Upper Control Arm Frame Mount brackets were designed as a compact package to mount your upper links on your frame in a triangulated upper link mount setup.

22 Degree Offset allows for quick installation of your upper control arms.

**Johnny Joints Sold Seperately**

TJ Ken · « **Reply #4 on:** 06/ 9/08 - 04:09PM »

Also....here's a sneak peak at one of our front Dana 60 Truss Systems coming....

TJ Ken · « **Reply #5 on:** 06/ 9/08 - 04:40PM »

14 Bolt Truss System with Pinion Tie-In

This KORE Truss System was developed for the ever popular GM 14 Bolt Axle. These axles have a reputation for being tough & so should the parts that accompany these axles. So with that in mind we designed this heavy-duty truss system.

- Truss body is CNC cut from 3/8" thick steel & then formed on a Press Brake for precise fit and ultimate strength

- The Pinion Tie-In is CNC cut from 1/4" thick steel & then formed on the brake to match up perfectly with the truss body

- The pinion tie-in is an integral part of the truss to add strength to the overall structure

- The truss system comes with 4 upper link mounting tabs

- The upper link mounting tabs are 1/4" thick and have a 9/16" hole, however they can be drilled out for you
specific needs

* Kit also comes with necessary 1/2" hardware to bolt pinion tie-in & truss together*

junkyard · « **Reply #6 on:** 06/14/08 - 09:44PM »

I can say first hand that those brackets are the bomb. I need to post more pics in my build thread. I have saved a ton of time using them versus making my own.

TJ Ken · « **Reply #7 on:** 07/11/08 - 12:34PM »

We're getting our inventory built up on some more products, so I've been adding them to the website...

Couple of the latest additions

Front Dana 60 Trusses for Fords with Integrated Ram Mount