Author Topic: Where to get a Tanny rebuild kit  (Read 1180 times)

Offline redneck_punk

  • Level 2
  • **
  • Posts: 173
Where to get a Tanny rebuild kit
« on: 03/26/07 - 07:30PM »
I need to know where I can get a tranny rebuild kit from local springfield area I need the whole kit bands and all any advise would be great
t's a Jeep NOT a sheep get off my tail!!!!!!!!

Offline junkyard

  • Level 4
  • ****
  • Posts: 752
  • GO BIG OR GO HOME!!!!!!
Re: Where to get a Tanny rebuild kit
« Reply #1 on: 03/27/07 - 10:57AM »
i dont have anywhere local for you, but napa stores normally have them, or try a tranny shop.
for rock crawling info and events   go to   www.rockcrawlinginfo.com

Offline Jeeprenegade

  • Level 2
  • **
  • Posts: 181
Re: Where to get a Tanny rebuild kit
« Reply #2 on: 04/ 8/07 - 02:24AM »
maby CATT, there are in SPringfield.
img]http://img.photobucket.com/albums/v85/Jeeprenegadester/Jeepbanner.png

1998 Jeep Sahara edition
4" rough country suspension lift
bushwacker fenders
warn rocker guards warn front bumper k&n air filter

Offline OJTV8CJ

  • Charter Members
  • Level 4
  • *
  • Posts: 843
Re: Where to get a Tanny rebuild kit
« Reply #3 on: 04/ 9/07 - 10:27AM »
DO NOT use CATT.  I used them to set up a rear axle once.  It was overpriced for the fact that it lasted 2 months out of warranty and grenaded again.
I cut sheetmetal for free.  It's fixing it that get's expensive.

Offline bigjeep2

  • Level 2
  • **
  • Posts: 222
Re: Where to get a Tanny rebuild kit
« Reply #4 on: 04/ 9/07 - 11:47PM »
Mid-america parts

water and kansas expressway
go east on water off of kansas south of chestnut and it will be on the south side.

Nice and cheap also get a torque converter you will regret it if you dont. We had mine rebuilt by a friend and used the old tc and it lasts like a month then I had to pull it again and put a new tc in it.
Yeah I gots a jeep, and yes I understand. I also have a car.