Author Topic: Installing new gears?  (Read 1741 times)

Offline Kcolg

  • Level 1
  • *
  • Posts: 84
Installing new gears?
« on: 11/24/06 - 05:32PM »
Any recommendations for someone to install gears.  I want it done right, but also at a cheap price.  Shade tree mechanics welcome.

Offline Bradman

  • Level 4
  • ****
  • Posts: 725
  • II've got a buzz and a woody, and I'm ready to go!
Re: Installing new gears?
« Reply #1 on: 11/25/06 - 08:53AM »
iF YOU DO FIND SOMEONE, LET BLUEYALLOW KNOW......please!
1999 TJ  2.5 inch Rancho Rockrawler lift  33inch BFG's  Loc-Rites front and rear!<br /><br />Ranch Rocker!<br />http://smorr.net/images/ranch_rockers_avatar50.png

Blueyellow

  • Guest
Re: Installing new gears?
« Reply #2 on: 11/25/06 - 07:55PM »
Why are you tired of me riding with ya
Al

Offline Bradman

  • Level 4
  • ****
  • Posts: 725
  • II've got a buzz and a woody, and I'm ready to go!
Re: Installing new gears?
« Reply #3 on: 11/25/06 - 08:06PM »
Nope, just want to see you break yours again!

LOL
1999 TJ  2.5 inch Rancho Rockrawler lift  33inch BFG's  Loc-Rites front and rear!<br /><br />Ranch Rocker!<br />http://smorr.net/images/ranch_rockers_avatar50.png

Blueyellow

  • Guest
Re: Installing new gears?
« Reply #4 on: 11/25/06 - 09:26PM »
OOOOHHHHHH That Was Harsh ..... But Maybe true LOL If I Break aNine inch it is time for a Total Rebuild ROCK BUGGY
Al

Offline DrLewall

  • Level 2
  • **
  • Posts: 114
Re: Installing new gears?
« Reply #5 on: 12/ 6/06 - 10:11PM »
Question for you guys that have changed gears...the YJ came stock with 3.07..I am wanting to install some 4.56..those of you who have 4.56, do you find that your top end barely meets the legal speed limit out on the hwy or is it just fine with the 456? I guess I shud've mentioned that I do run 33x12.50..from what I have read so far, many say that the 4.56 should be just abt right..would still like your input..tnx
DrLewall
"Doc"

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: Installing new gears?
« Reply #6 on: 12/ 6/06 - 10:17PM »
With 33's it will be about right to have power and not be over working the motor.  I've run 4:88's with 33's and it still wasn't over revving or anything.

Aaron
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline Kcolg

  • Level 1
  • *
  • Posts: 84
Re: Installing new gears?
« Reply #7 on: 12/ 7/06 - 05:37PM »
Just FYI - I have a place in Nevada, MO that does gear installs with a good reputation.  The are doing the install right now and quoted me $100 per axle for labor, if I supply the parts and that included the Ected lockers installed as well. Great deal!

Offline DrLewall

  • Level 2
  • **
  • Posts: 114
Re: Installing new gears?
« Reply #8 on: 12/ 8/06 - 12:25AM »
TNX for the info..I shall keep this info for future reference...
DrLewall
"Doc"

Offline Big Pimpin

  • Charter Members
  • Level 4
  • *
  • Posts: 690
Re: Installing new gears?
« Reply #9 on: 12/ 8/06 - 12:27AM »
Quote from: "DrLewall"
Question for you guys that have changed gears...the YJ came stock with 3.07..I am wanting to install some 4.56..those of you who have 4.56, do you find that your top end barely meets the legal speed limit out on the hwy or is it just fine with the 456? I guess I shud've mentioned that I do run 33x12.50..from what I have read so far, many say that the 4.56 should be just abt right..would still like your input..tnx


I think that 4.56 is ideal with 35" tires, not sure about 33".  I had 4.88's with 35's and it was too low to do a lot of highway driving so I put on 37's.  Do you have an overdrive?
The phrase "You almost made it" breaks a lot of things.

Offline DrLewall

  • Level 2
  • **
  • Posts: 114
Re: Installing new gears?
« Reply #10 on: 12/ 8/06 - 12:40AM »
Yes, I do have 5th (Over drive)..but with the 33x12.50's only time I get to use it is on a long down hill stretch..I usually dont do any fwy or 65mph + driving..love the slower pace and back roads more so I figure 4.56 gears would pull better on the road and work even better on the trail.
DrLewall
"Doc"

Offline trailertrash

  • Level 1
  • *
  • Posts: 70
Re: Installing new gears?
« Reply #11 on: 12/ 9/06 - 09:36AM »
Hey give Phils auto repair a call  417-468-2339. He is in Marshfield and caters to the  4X4s he is good and resonable. I had him do work on my jeep and I believe shamoo has too.